vectra brakes

- B
- bjj55
  
  Contact options for registered users
posted
18 years ago

Thu, Nov 3, 2005 3:47 PM

hi guy,s i have a r reg 2ltr sri the brake pedal is going down to within an inch of the floor. i have tried the following. changed the master cylinder front and rear pads had the servo checked. when you bleed the system it brings the pedal up but when left for a couple of mins it returns to going to the floor. i know it seems like air in the system but i have bled and bled the brakes i can,t find any leaks or see any dark patches anywhere. any help please

Loading thread data ...

- K
- Kirk Johnson
  
  Contact options for registered users
Vote on answer
posted
18 years ago

Thu, Nov 3, 2005 6:16 PM

- C
- Conor
  
  Contact options for registered users
Vote on answer
posted
18 years ago

Fri, Nov 4, 2005 1:17 AM

Automatic brake adjusters working on the rear?

Next time it goes that low, pull the handbrake on until you feel it starting to slow the car then back it off a notch or two. Try the footbrake again. If it's back to normal the adjusters aren't working.

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.