KEYS AND DOORS
KEYS
[1] Master keys (black) – The master keys work in every lock. For your Lexus dealer to make you a new key with a built-in transponder chip, your dealer will need it.
[2] Sub key (gray) – The sub key will not open the glove box.
[3] Key number plate – Keep the plate in a safe place such as your wallet, not in the vehicle.
A transponder chip for the engine immobiliser system has been placed in the head of the master and sub keys. These chips are required for the system to function correctly, so be careful not to lose these keys. If you make your own duplicate key, you will not be able to cancel the system or start the engine.
To protect items locked in the glove box when using valet parking, leave the sub key with the attendant.
Since the side doors and back door can be locked without a key, you should always carry a spare master key in case you accidentally lock your keys inside the vehicle.
If you should lose your keys or if you need additional keys, duplicates can be made by a Lexus dealer using the key number.
We recommend writing down the key number and storing it in a safe place.
8
KEYS AND DOORS
Flat key
As a transponder chip is built in its key case, you can start the engine with this key.
The flat key works in every lock.
A transponder chip for the engine immobiliser system has been placed in the key case of the flat key. This chip is required for the system to function correctly, so be careful not to lose this key. If you make your own duplicate key, you will not be able to cancel the system or start the engine.
Insert your key plate in its key case as shown. We recommend that you always carry this with you for emergency use. Do not leave it in your vehicle.
Starting the engine using a flat key
- Remove the key plate from the key case.
- Insert the key plate into the ignition switch. The indicator light keeps flashing.
- Bring the key case closer to the ignition switch within 10 seconds as indicated by the arrow head. The indicator light goes out. This means the engine immobiliser system is automatically canceled. (For details, see “Engine immobiliser system” on page 11.) You can put the key case away then. You cannot cancel the engine immobiliser system if 10 seconds have passed after you inserted the key plate. You need to remove the key plate from the ignition switch and try it again from the step 2.
- Start the engine within 60 seconds after the security indicator light goes out. You cannot start the engine if 60 seconds have passed after the security indicator went off. You need to remove the key plate from the ignition switch and try it again from the step 2.
9
KEYS AND DOORS
NOTICE
- Do not let the key case become bent as the key plate may fall out or become bent also.
- The flat key is designed for emergency use only.
When using a key containing a transponder chip, observe the following precautions:
- When starting the engine, do not use the key with a key ring resting on the key grip and do not press the key ring against the key grip. Doing so may prevent the engine from starting, or may cause the engine to stop soon after it starts.
- When starting the engine, do not use the key in proximity with other transponder keys (including keys of other vehicles), and do not press other key plates against the key grip. Doing so may prevent the engine from starting, or may cause the engine to stop soon after it starts. If this happens, remove the key once and then insert it again after removing other transponder keys (including keys of other vehicles) from the ring or while gripping or covering them with your hand to start the engine.
10
KEYS AND DOORS
11G035c
- Do not bend the key grip or flat key.
- Do not cover the key grip or flat key with any material that cuts off electromagnetic waves.
- Do not knock the key or flat key hard against other objects.
- Do not leave the key or flat key exposed to high temperatures for a long period, such as on the dashboard or hood under direct sunlight.
- Do not put the key or flat key in water or wash it in an ultrasonic washer.
- Do not use the key or flat key with electromagnetic materials.
ENGINE IMMOBILISER SYSTEM
11A614
The engine immobiliser system is a theft prevention system. When you insert the key in the ignition switch, the transponder chip in the key's head transmits an electronic code to the vehicle. The engine will start only when the electronic code in the chip corresponds to the registered ID code for the vehicle.
The system is automatically set when the key is removed from the ignition switch. At this time, the security indicator light flashes. When you insert the key in the ignition switch, the security indicator light goes out and the system is canceled automatically, which enables the engine to start.
For your Lexus dealer to make you a new key with built-in transponder chip, your dealer will need your key number and master key. However, there is a limit to the number of additional keys your Lexus dealer can make for you.
11
KEYS AND DOORS
If you make your own duplicate key, you will not be able to cancel the system or start the engine.
For vehicles sold in U.S.A.
FCC ID: MOZRI-20BTY MADE IN JAPAN
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
This device complies with SRS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WIRELESS REMOTE CONTROL*
[1] Locking the doors [2] Unlocking the doors and opening the windows and moon roof [3] Indicator light [4] Sounding an alarm
NOTE: This feature can be deactivated as vehicle theft deterrent measure in case of the loss of the wireless remote control key. Ask your Lexus dealer for details.
When you operate any button on the key, push it slowly and surely. At this time, the indicator light on the key grip flashes once.
The operational range of the wireless remote control is approximately 1 meter (3 ft.). The effective range may vary with different conditions. To activate the wireless remote control without fail, do it approximately 1 meter (3 ft.) from your Lexus.
12
KEYS AND DOORS
In the following cases, the battery in the key may be discharged. If this is the case, replace it using a special screwdriver.
- The remote control does not work.
- The operational range of wireless remote control becomes extremely short.
- The indicator light on the key is dimmed or does not come on.
For the replacement of the battery, see "Replacing the battery" on page 16. You can also have the battery of the key replaced by your Lexus dealer.
If you lose the wireless key, contact your Lexus dealer as soon as possible to avoid the possibility of theft, or an accident.
You can use up to 4 wireless remote control keys for the same vehicle. Contact your Lexus dealer for detailed information.
The wireless remote control key is an electronic component. Observe the following instructions in order not to cause damage to the key.
- Do not leave the wireless remote control key on places where the temperature becomes high such as on the dashboard.
- Do not disassemble it.
- Avoid knocking it hard against other objects or dropping it.
- Avoid putting it in water.
Locking/Unlocking the doors
When you push the "LOCK" button on the key, all the doors can be locked from outside the vehicle.
At this time, you can hear one beep and turn signal lights flash once.* However, when you push the "LOCK" button with any door not closed securely, the buzzer sounds for 10 seconds.** To stop the buzzer, close all the doors securely or push the "UNLOCK" button. If the key is in the ignition switch, locking cannot be done.
NOTE: *The turn signal lights can be set not to flash and beep volume can be changed. **The buzzer can be set not to sound if a door is not closed securely. Ask your Lexus dealer for details.
When you push the "UNLOCK" button, the driver's door is unlocked. Pushing that button once again within 3 seconds from the first push, all other doors are also unlocked.*
At this time, two beeps sound and turn signal lights flash twice.**
NOTE: *The 2-step unlocking function can be changed. **The turn signal lights can be set not to flash and beep volume can be changed. Ask your Lexus dealer for details.
13
KEYS AND DOORS
Together with the activation of unlocking, the interior light comes on for 15 seconds if the interior light switch is in "DOOR" position.* However, this function does not work when the ignition key is in the "ACC" or "ON" position. For further information, see "Interior lights" on page 65.
You have 30 seconds to open a door after using the wireless remote unlock feature.** If a door is not opened by then, all the doors will be automatically locked again. This function does not work when the ignition key is inserted.
NOTE: *The interior light can be set not to come on or the duration of lighting can be changed. **The time before automatic re-locking can be changed. Ask your Lexus dealer for details.
Even if the "LOCK" or "UNLOCK" switch is kept pressed in, the locking or unlocking operation is not repeated. Release the switch and then push again.
Sounding an alarm*
When you push the "PANIC" button for about 1 second, an alarm sounds to deter any person trying to break into or damage your vehicle.
If you want to stop the alarm, push "LOCK", "UNLOCK" or "PANIC" button for about 1 second.
This function does not work when the ignition key is in the "ON" position.
NOTE: *The alarm can be set not to sound. Ask your Lexus dealer for details.
14
KEYS AND DOORS
Operating the windows and moon roof
The windows and moon roof can be operated using a wireless remote control key from outside the vehicle.*
NOTE: The windows and moon roof can be deactivated. The moon roof can be set to slide open or tilt up or deactivated. Ask your Lexus dealer for details.
Push the "UNLOCK" button until the windows and moon roof start to move. At this time one beep sounds. When you release the button, the windows and moon roof stop operating.
This function will work even with the window lock switch pressed in.
For vehicles sold in U.S.A.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
15
KEYS AND DOORS
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
For vehicles sold in Canada
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Replacing the battery When you replace the battery, prepare a lithium battery CR1616 or equivalent and a special screwdriver.
CAUTION Special care should be taken to prevent small children from swallowing the removed battery or components.
NOTICE
- When replacing the battery, be careful not to lose the components, screws and O-ring.
- Replace only with the same or equivalent type recommended by a Lexus dealer.
- Dispose of used battery according to the local laws.
16
KEYS AND DOORS
- Remove the screw, and then the cover while pushing it in the arrow direction.
2. Remove the module from the key frame.
3. Remove the 2 screws to take out the lid of the module.
4. Take out the discharged battery and put a new battery with the positive side up.
NOTICE
- Make sure the positive side and negative side of the battery are faced correctly.
- Do not replace the battery with wet hands. Water may cause unexpected rust.
- Do not touch or move any components in the transmitter, or it may interfere with proper operation.
- Be careful not to bend the electrode of the battery insertion and that dust or oils do not adhere to the inside of the module.
- Take care not to lose the screws and O-ring.
- Install the lid with the 2 screws.
17
KEYS AND DOORS
NOTICE Take care not to damage or bend the O-ring when installing.
- Install the module into the key frame and secure the cover with the screw.
- When pushing any switch on the wireless key, make sure the indicator light comes on.
SIDE DOORS
Locking with key
► 1 Lock 2 Unlock
Turn the key towards the front of the vehicle to lock and towards the back to unlock.
All the side doors and back door lock and unlock simultaneously with either front door. In the driver's door lock, turning the key once will unlock the driver's door and twice in succession will unlock all the side doors and back door simultaneously. In the passenger's door lock, turning the key once will unlock all the side doors and back door simultaneously.*
NOTE: The 2-step unlocking function can be changed. Ask your Lexus dealer for details.
18
KEYS AND DOORS
Together with the activation of unlocking, the interior light comes on for 15 seconds if the interior light switch is in “DOOR” position. However, this function does not work when the ignition key is in the “ON” position. For further information, see “Interior lights” on page 65.
Locking with inside lock button
1130.000a
▶ 1 Lock 2 Unlock
Push in the lock button to lock and unlock the door.
The front doors can be opened by pulling the inside handles even if the lock buttons are in the locked position.
CAUTION
Do not pull the inside handle of the front doors while driving. The doors will open and an accident may occur. Lexus strongly recommends that all children be placed in the rear seat of the vehicle.
Closing the door with the lock button pushed in will also lock the door. Be careful not to lock your keys in the vehicle. With the key in the ignition switch and the front door open, the lock knob cannot be moved in the lock position.
19
KEYS AND DOORS
CAUTION Before driving, make sure the doors are closed and locked, especially when small children are in the vehicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the vehicle during an accident. It also helps prevent the doors from being opened unintentionally.
Locking with power door lock switch
► 1 Lock 2 Unlock
To lock all the side doors and back door simultaneously, push the power door lock switch down on the front side. Pushing down on the rear side will unlock them.
The same switch is also found on the front passenger's side.
When the front doors are locked from the outside, the switch will not work until either front door is unlocked with the key or lock button.
Auto door locking function*: All the doors will lock automatically when the selector lever is moved out of "P" position. This auto door locking function is operable if any doors are unlocked while the engine running.
NOTE: This auto door locking function can be disabled or changed. Ask your Lexus dealer for details.
20
KEYS AND DOORS
Locking with rear door child-protector
▶ 1 Lock 2 Unlock
Whenever small children are in the vehicle, lock the rear door so that it does not open from the inside. To do this, move the lever to the "LOCK" position as shown and then close the door.
BACK DOOR
Opening and closing
▶Opening from outside 1 Unlock 2 Lock 3 Open
All the doors lock and unlock simultaneously with the back door.
21
KEYS AND DOORS
▶Opening from inside 1 Unlock 2 Lock 3 Open The back door can be opened as shown.
See "Luggage stowage precautions" on page 82 for precautions to observe in loading luggage.
After closing the back door, try pulling it up to make sure it is securely closed.
Closing the back door with the lock button pushed in will also lock the back door. Be careful not to lock your keys in the vehicle.
The back door lock will be controlled with the power door lock switch. (For instructions, see "Side doors" on page 18.)
CAUTION Keep the back door closed while driving. This not only keeps the luggage from being thrown out but also prevents exhaust gases from entering the vehicle.
22
KEYS AND DOORS
Locking with back door child–protector
1 Lock 2 Unlock
Whenever small children are in the vehicle, lock the back door so that it does not open from the inside. To do this, move the lever to the "LOCK" position as shown and then close the back door.
23
24
SECTION 1 – 2
INSTRUMENTS AND CONTROLS
Switches
- Headlight switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........ 26
- Headlight dimmer and turn signal switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........ 28
- Fog light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........
SWITCHES
HEADLIGHT SWITCH
To turn the lights on, twist the knob on the end of the lever. FIRST CLICKSTOP: Only the parking, tail, license plate, side marker and instrument panel lights turn on. However, if the surroundings are bright and if the instrument panel light control dial is not turned fully on, the instrument panel lights do not come on. SECOND CLICKSTOP: Headlights also turn on. THIRD CLICKSTOP ("AUTO"): The headlights and all other lights automatically turn on depending on the darkness of the surroundings.* Vehicles sold in U.S.A: When the headlights are on, the headlight indicator lights up in the instrument cluster. Vehicles sold in Canada: When the tail lights are on, the tail light indicator lights up in the instrument cluster.
Manually twist the knob to the second clickstop to turn on the headlights if they are needed immediately when entering a dark tunnel, parking structure, etc. When the headlight switch is turned to the first or second clickstop, the brightness of the instrument cluster will be reduced slightly unless the instrument panel light control dial is turned fully on. *NOTE: The operating condition or sensitivity can be changed. Ask your Lexus dealer for details.
The automatic light control sensor is on top of the passenger's side instrument panel. Do not place anything on the instrument panel, and/or do not affix anything on the windshield to block this sensor.
26
SWITCHES
When you turn on the headlights, the lights automatically turn off about 30 seconds after any of the doors is opened and closed with the ignition switch turned to the "ACC" or "LOCK" position.* To turn them on again, turn the ignition switch to the "ON" position, or turn the headlight switch off and then twist the knob until the first or second clickstop. If you are going to park for over one week, make sure the headlight switch is off.
When the headlight switch is on with all the side doors and back door locked, pushing the "LOCK" button on the wireless remote control key turns off the headlights.
NOTE: *The time before turning off the lights can be changed. Ask your Lexus dealer for details.
Daytime Running Light System The headlights turn on at reduced intensity when the parking brake is released with the engine started, even with the light switch in the "OFF" position. They will not go off until the ignition switch is turned off.
To turn on the other exterior lights and instrument panel lights, twist the knob to the first clickstop.
Twist the knob to the second clickstop to turn on the headlights to full intensity for driving at night.
When setting the knob to the third clickstop ("AUTO"), the headlights will automatically adjust to full intensity and/or turn on the other lights depending on the darkness of the surroundings. Likewise, as the surroundings become brighter, the headlights will turn to reduced intensity, ultimately turning off the other lights.
NOTICE To prevent the battery from being discharged, do not leave the lights on longer than necessary when the engine is not running.
27
SWITCHES
HEADLIGHT DIMMER AND TURN SIGNAL SWITCH
For high beam, push the lever forward. Pull it back for low beam. For the headlight flasher, pull it further back.
A blue light in the instrument cluster indicates high beam or headlight flasher is on.
The headlight flasher works even when the headlight switch is off.
For signaling turns, move the lever up or down in the conventional manner.
The ignition key must be in the "ON" position.
The turn signal is self-cancelling after a turn, but after a lane change, you may have to cancel it by hand. You can also signal a lane change by moving the turn signal lever partway and holding it there.
If the green light in the instrument cluster flashes faster than normal, it indicates that the front or rear turn signal bulb has burned out. If this indicator light does not come on, the fuse or the indicator light itself has probably failed.
28
SWITCHES
FOG LIGHT SWITCH
To turn on the fog lights, turn the switch to the "ON" position. They will come on only when the headlights are on low beam.
WINDSHIELD WIPER AND WASHER SWITCH
► 1 Automatic control adjuster 2 Washer on
To turn the wipers on, move the lever down until you reach the desired speed setting.
The ignition switch must be in the “ON” position.
There are 3 settings:
“AUTO” position: Automatic operation
The wiper speed is determined by the amount of raindrops detected by the windshield sensor (shown in the illustration), and the vehicle speed.
“LO” position: Low speed operation
“HI” position: High speed operation
29
SWITCHES
Twist the automatic control adjuster in the “–” direction to lower the sensitivity, and the “+” direction to boost the sensitivity.
With the ignition switch turned off, if the windshield sensor is touched by reason of cleaning the windshield or for any other reason, either of the following operations may cause automatic wiper activation.
- Turning the ignition switch on with the wiper lever in the “AUTO” position.
- Turning the ignition switch on and move the wiper lever down in the “AUTO” position.
Even with the wiper lever in the “AUTO” position, the system will switch to intermittent operations if the system malfunctions.
When the system malfunctions, the time interval between sweeps is shortened as the vehicle speed increases. When the vehicle speed reaches more than about 20 km/h (12 mph) with the interval adjuster in ”+” position, the time interval becomes the shortest 1.5 seconds.
The system will turn off if the windshield gets extremely hot (at more than 90°C or 194°F) or cold (at less than –30°C or –22°F).
CAUTION
Be careful not to get your fingers caught between the wipers and windshield.
When the wiper lever is in the “AUTO” position with the ignition switch on, the wipers could operate automatically in the following cases:
- If you touch the upper center of the windshield adjacent to the sensor.
- If you wipe the upper center of the windshield (adjacent to which the sensor is located) with a towel.
- If the windshield vibrates.
- If you touch the sensor.
If you stop the vehicle with the wiper switch in the “LO” position, the wiper speed automatically changes from low speed to intermittent operation speed.* This function does not work when the interval adjuster is in the ”+” position.
NOTE: *This feature can be deactivated. Ask your Lexus dealer for details.
To make the washer squirt, pull the lever toward you and release it.
30
SWITCHES
If the wiper lever is in the “OFF” position, the wipers will automatically make 3 wipes and then a single wipe later to sweep the windshield completely.* The interval between the 3 wipes and the last wipe will depend on the vehicle speed. The last sweep does not happen if the vehicle speed exceeds about 170 km/h (106 mph).
NOTE: *The last single wipe can be deactivated. Ask your Lexus dealer for details.
The low washer fluid warning light in the instrument cluster comes on when the fluid level in the tank becomes very low. For information on adding washer fluid, see "Adding washer fluid" on page 386.
In cold weather, warm the windshield with the defroster before using the washer. This will help prevent icing, which could block your vision.
The rear window and outside rear view mirror defogger automatically turns on when you operate the wipers.
NOTICE Do not operate the wipers if the windshield is dry. It may scratch the glass.
When waxing your vehicle, make sure the washer nozzles do not become blocked. If a nozzle becomes blocked, contact your Lexus dealer to have the vehicle serviced.
NOTICE If a nozzle becomes blocked, do not try to clear it with a pin or other object. The nozzle will be damaged.
31
SWITCHES
REAR WINDOW WIPER AND WASHER SWITCH
► 1 Washer on during wiping 2 Washer on
To turn the wipers on, twist the knob at the end of the lever. The ignition key must be in the "ON" position.
There are 2 settings: "INT" position: Intermittent operation "ON" position: Low speed operation
If you stop the vehicle with the wiper switch in the "LO" position, the wiper speed automatically changes from low speed to intermittent operation speed.
If you shift the selector lever to the "R" position while the windshield wipers are operating or for 17 seconds after the windshield wipers stop operating, the rear window wiper will activate once.*
NOTE: This feature can be deactivated. Ask your Lexus dealer for details.
To make the washer squirt, twist the knob downward to position 2.
The rear wiper will automatically make 3 wipes and then a single wipe later to sweep the rear window completely.
To make the washer squirt while operating
SWITCHES
HEADLIGHT CLEANER SWITCH
(CANADA ONLY)
To spray fluid on the headlights, push the switch with the headlights on.
The ignition key must be in the "ON" position.
The low washer fluid warning light in the instrument cluster comes on when the fluid level in the tank becomes very low. For information on adding washer fluid, see "Adding washer fluid" on page 386.
NOTICE Do not turn the headlight cleaner on with the washer fluid tank empty. It may cause the cleaner motor to overheat.
REAR WINDOW DEFOGGER SWITCH
To turn the electric rear window defogger on, push the switch.
The ignition key must be in the "ON" position.
The thin heater wires on the inside of the rear window will quickly clear the surface. An indicator light will illuminate to indicate the defogger is operating.
The system will automatically shut off when the defogger has operated about 15 minutes.
If further defrosting or defogging is desired, simply actuate the switch again. When the surface has cleared, push the switch once again to turn the defogger off. Continuous use may cause the battery to discharge, especially during stop-and-go driving. The defogger is not designed to dry rain water or to melt snow.
33
SWITCHES
NOTICE
- When cleaning the inside of the rear window, be careful not to scratch or damage the heater wires or connectors.
- To prevent the battery from being discharged, turn the switch off when the engine is not running.
OUTSIDE REAR VIEW MIRROR DEFOGGER SWITCH
To turn the electric outside rear view mirror defogger on, push the switch.
The ignition key must be in the "ON" position.
The thin heater wires on the heater panels in the outside rear view mirrors will quickly clear the surface. Keep your hands off the mirror faces when the switch is on. An indicator light will illuminate to indicate the defogger is operating.
The system will automatically shut off when the defogger has operated about 15 minutes.
34
SWITCHES
POWER WINDOW SWITCHES
1 For driver’s window 2 For front passenger’s window 3 For left rear window 4 For right rear window
To raise or lower the windows, use the switch on each door. The passengers’ windows can also be controlled by the switches on the driver’s door.
The power windows work when the ignition key is in the "ON" position.
Key off operation: Even if the ignition key is turned to the "ACC" or "LOCK" position with all the doors closed, the window can be operated until either of the front doors is opened (or for about 45 seconds).
CAUTION
Since the mirror surfaces can get hot, do not touch them when the switch is on.
If further defrosting or defogging is desired, simply actuate the switch again. When the surface has cleared, push the switch once again to turn the defogger off. Continuous use may cause the battery to discharge, especially during stop-and-go driving. The defogger is not designed to dry rain water or to melt snow.
If the outside rear view mirrors are heavily coated with ice, use a spray de-icer before operating the switch.
NOTICE
To prevent the battery from being discharged, turn the switch off when the engine is not running.
35
SWITCHES
Operating the switches
To raise or lower the window, pull the switch halfway up or push it halfway down.
Automatic operation: To fully raise or lower the window automatically, pull the switch fully up or push it fully down.
To stop the window partway, lightly push or pull the switch in the opposite direction and then release it.
Operating the window lock switch
►Indicator light
With the window lock switch pressed in, only the driver’s window can be raised or lowered.
The indicator lights on the switch tell you which of the switches can be operated.
Even with the window lock switch pressed in, the windows will be opened from outside the vehicle using an ignition key or wireless remote control.
36
SWITCHES
Operating the windows from outside the vehicle
The windows can be operated using an ignition key.* NOTE: This feature can be deactivated. Ask your Lexus dealer for details.
Insert the ignition key into the keyhole on the driver's side. To close the windows: Turn the key in the locking direction and hold it.
After the door is locked, the windows begin to close. To stop in the middle, return the key.
To open the windows: Turn the key in the unlocking direction and hold it.
After the door is unlocked, the windows begin to open. To stop in the middle, return the key.
This function will work even with the window lock switch pressed in.
Jam protection function
During automatic raising operation, key off raising operation or raising operation using the ignition key from outside, the window stops and is lowered if something gets caught between the window and window frame.
If the window receives a strong impact, this function may work even if nothing is caught.
CAUTION
To avoid serious personal injury, you must do the following.
- Before you close the power windows, always make sure there is nobody around the power windows. You must also make sure the heads, hands and other parts of the bodies of all occupants are kept completely inside the vehicle. If someone's neck, head or hands get caught in a closing window, it could result in a serious injury. When anyone closes the power windows, make sure he or she operates the windows safely.
- When small children are in the vehicle, never let them use the power window switches without supervision. Use the window lock switch to prevent them from making unexpected use of the switches.
37
SWITCHES
- Be sure to remove the ignition key when you leave your vehicle.
- Never leave anyone (particularly a small child) alone in your vehicle, especially with the ignition key still inserted. Otherwise, he/she could use the power window switches and get trapped in a window. Unattended person (particularly a small child) can be involved in a serious accident.
- Never try jamming any part of your body to activate the jam protection function intentionally.
- The jam protection function may not work if something gets caught just before the window fully closed.
POWER QUARTER WINDOW SWITCH
1 For the left quarter window 2 For the right quarter window
The quarter windows can be operated with the "REAR VENT" switch on the instrument panel.
To open: Push the right side of the switch. To close: Push the left side of the switch.
Both the left and the right quarter windows move as long as you hold the switch.
38
SWITCHES
CAUTION To avoid serious personal injury, you must do the following.
- Always make sure the hands and other parts of the bodies of all occupants are kept completely inside the vehicle before you close the power quarter windows. If someone's hands get caught in a closing window, it could result in a serious injury. When anyone closes the power quarter windows, make sure he/she operates the windows safely.
- When small children are in the vehicle, never let them use the power rear quarter window switches without supervision.
- Be sure to remove the ignition key when you leave your vehicle.
- Never leave anyone (particularly a small child) alone in your vehicle, especially with the ignition key still inserted. Otherwise, he/she could use the power quarter window switches and get trapped in a window. Unattended person (particularly a small child) can be involved in a serious accident.
EMERGENCY FLASHER SWITCH
1-200603a
To turn on the emergency flashers, push the switch. To turn them off, push the switch again.
All the turn signal lights will flash. The emergency flashers will work with the engine running or off and with or without the ignition key.
Turn on the emergency flashers to warn other drivers if you must stop your vehicle where it might be a traffic hazard.
Always pull your vehicle as far off the road as possible.
The turn signal light switch will not work when the emergency flashers are in operation.
NOTICE To prevent the battery from being discharged, do not leave the switch on longer than necessary when the engine is not running.
39
SWITCHES
SEAT HEATER SWITCHES
▶ 1 For driver’s seat 2 For front passenger’s seat 3 High heating temperature 4 Low heating temperature
To turn on the seat heater, push the switch to "HI" (high temperature) or "LO" (low heating temperature). Pushing lightly on the opposite side will turn it off.
The ignition key must be in the "ON" position.
CAUTION
Occupants must use caution when operating the seat heater because they may experience minor burns even at low temperatures. Use extra caution for;
- Babies, small children, elderly persons, sick persons or handicapped persons
- Persons who have delicate skin
- Persons who are exhausted
- Persons who have taken alcohol or drugs which induce sleep (sleeping drug, cold remedy, etc.).
To prevent the seat from overheating, do not use the seat heater with a blanket, cushion, or other insulating objects which cover the seat.
NOTICE
- Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
- When cleaning the seats, do not use organic substances (paint thinner, benzine, alcohol, gasoline, etc.). They may damage the heater and seat surface.
- To prevent the battery from being discharged, turn the switches off when the engine is not running.
40
SWITCHES
ROLL SENSING OF CURTAIN SHIELD AIRBAGS OFF SWITCH
The roll sensing of curtain shield airbags off switch can turn off the curtain shield airbags and front seat belt pretensioners in a vehicle rollover. This switch should only be used in a situation where the inflation is not desired (such as during extreme offroad driving).
When you push the roll sensing of curtain shield airbags off switch for a few seconds with the ignition switch on, the roll sensing of curtain shield airbags off indicator light comes on and the roll sensing function is turned off. When you push the switch again, the indicator light goes off and the roll sensing function is turned on.
In a severe side impact, the curtain shield airbag on the impacted side will inflate even if the roll sensing function is turned off.
If the ignition switch is turned to “ACC” or “LOCK” with the roll sensing function off and then the ignition switch is turned back to “ON”, the roll sensing function will be back on automatically.
For details, see “Front seat belt pretensioners” on page 131 or “SRS airbags” on page 136.
CAUTION
- Make sure the roll sensing of curtain shield airbags off indicator light is not on.
- When the roll sensing of curtain shield airbags off switch is turned on (and the roll sensing of curtain shield airbags off indicator light is on), the curtain shield airbags and front seat belt pretensioners will not inflate in a vehicle rollover. Turning off the curtain shield airbags can reduce the occupant protection which your vehicle safety systems can provide to you in certain accidents and increase the likelihood of death or serious injuries.
41
42