Here I am, ready to install my RB Header, FM Hi-Flow Cat and FM Dual NA Exhaust, and can't find where the O2 sensor pig-tail plugs into the system. -- Can anyone out here help?
TIA
- L
'97 STO, "Chouki"
// Change TEJAS to TX to reply via eMail //
If you mean the O2 Sensor itself, with the hood up and with you standing in front of your car, look to the right and close to the fire wall. It sits down a bit. Geeze, I can't really describe it after all LOL. It may be a very tight fit, meaning, hard to "unscrew".
Does that help? ;) maybe not.... ~Cissy :-)
Cissy -
Thanks for the post...
Since I have a '97, I have one fore and aft of the CAT.
I found the connection that runs up the back end of the engine and then snaps into the harness.
It is the one behind the CAT that is troubling me. (It looks as if it feeds into the interior, but I would rather not have to pull out the carpet to unclip a connector... ;-)
- L
'97 STO, "Chouki"
// Change TEJAS to TX to reply via eMail //
Oh, ok! I didn't know there is a sensor behind the CAT.....sorry I couldn't be of more help, but I do know there must be a ton of Miataphelites here that can help :) ~Cissy :-)
Disregard!
I found some local help and have successfully installed the new exhaust.
(Thanks again Cissy!)
- L
'97 STO, "Chouki"
// Change TEJAS to TX to reply via eMail //
I didn't do anything, but it's the thought that counts, right? ;-D
Glad you are all fixed UP! :) :) ~Cissy :-)
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.