95 Eagle Talon Built, but has bugs.. Please Help.

Ok first let me give you the info, then ill give you the problems. I just build a 4g63 (2.0 Turbo)Engine, inside and out.

Inside: Ferria Valves JE Forged pistons JE High Performance Rings Eagle H-Beam Rods Clevitte Main and Rod Bearings

Outside: Garret t4 Turbo HKS headers JDM Intercooler (2.75 inch Hard Pipes) HKS SS Blow off valve Evo 8 Injectors

Electronics: Apexi S-AFC Apexi AVC Apexi Turbo Timer

OK now you have a basic idea of what im working with, here is a few bugs I can not figure out.

1) Driving down the road (60MPH) the car jumps real bad. 2) Will not idle 3) If I punch it hard, lots of black smoke comes out the back and you can smell Gasoline.

Im leaning to believe it is a matter of flooding causing all these problems, I have look over and over again for vaccum leaks, just be be on the safe side, and there isnt any. I do not know what else to do. Any help will be greatly appreciated. Thank You

Jerry

Reply to
Jerry G
Loading thread data ...

I'm not a big turbo guy, but I would suspect bad problems in the mixture regulating process.

Was the car turbo to begin with? Then take out the extra electronics and see if its better

if not...... well get out your books and meters to see if the components that tell the box how much fuel to mix in are doing their job right.

-Speedy

Jerry G wrote:

Reply to
Speedy Pete

x-no-archive: yes

First thing to check is always BOOST LEAK. Can you lean it out in steps with your AFC? Are those EVO 8 injectors compatible? I know the EVO 3 were direct replacements, but thought that they have changed the resistance or something on the EVO 8 - not sure???

Go check out dsmtuners - someone maybe able to help you...

formatting link

Reply to
GOP=Gay Old Pedophiles

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.