I have obtained a pair of retractable side mirrors from a Lancer Touring
1.8L (CS5A) to install on my Lancer (CS2A) but to my surprise, the connectors on the mirror side were different, ie orginal 3 pins but retractable had 5 pins, and it also seem to be missing a couple of wires. I have bought a switch from the local agent to include the retract button but again although the socket was similar, i believe 3 wires or so were missing since the socket had 3 pins with no wires connected. I am unable to know if there are any circuits inbetween the mirror and switch since the switch does not seem to be able to handle a large motor load and wiring the mirrors to another switch will not work either as i believe there needs to be a +12V and -12V (this is a rough guess thru measurement ... i can be wrong though. I would appreciate is nay could shed some light on this, as well as if there are any diagrams showing how things work.Thanks & Regards
Gerald.