Anyone know how I can colour my alloy sump pan? Take it to a wheel refinisher? Brake caliper paint? Any ideas?
Thanks, Jerry
Anyone know how I can colour my alloy sump pan? Take it to a wheel refinisher? Brake caliper paint? Any ideas?
Thanks, Jerry
Why?
Mine's sort of black and silver with a combination of wet and baked on oil.
Why not? Just for fun (if cheap). The sump is visible from both sides of the car.
Had two AlfaSuds and a 164 V6.
Jerry
A "Damn" good clean, then any engine paint. Engine "enamel" is available cheaply from your local motor factors in lots of splediferous colours :)
Is this on that fecking Sierra?
You can do it yourself but you willneed to thoroughly degrease it before you start. Then use a decent etch primer to get a good key for the paint. Then use any chip-resistant finish. Personally I'd prefer to have a polyurethane two-pack finish which would mean getting someone else to spray it. But you could get an acceptable and long-lived finish with plastikote. I've used it over an etch primer on several alloy bits in the past with decent results.
Thanks Tony and Steve. Looks cheap enough to give it a go.
Jerry
As the resident VW liker, I feel duty bound to tell you to polish it to a mirror finish. Then chrome the floorpan.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required