This seems to be a difficult part to locate. Anyone know where to get also is it possible to get the rubber without the molding?
Appreciate any help.
Thanks,
Gary snipped-for-privacy@cox.net
This seems to be a difficult part to locate. Anyone know where to get also is it possible to get the rubber without the molding?
Appreciate any help.
Thanks,
Gary snipped-for-privacy@cox.net
Photobossman opined in news:BFldd.56000$kz3.42681@fed1read02:
Is it just me.. or does anyone else remember that as "one-piece"?
I've replaced two of those thick/wide ones... with narrow belt molding in the belt line groove, a la SVO.
Check Late Model Restoration
50resto.comDo a search for "outside door belt" on their website. Found them for
1979 - 86 on the middle of page 44 of their catalog if you can get your hands on one.Claud
PS They carry alot of Fox body stuff that is a little hard to locate elsewhere
Photobossman wrote:
I am justrying to find a solution as 50 restore says that thaey are trying to get them if they can and Mine are basically gone extreemly warn away due to the excessive heat here in Phoenix. Has any one here found a replacement that will work.
Thanks for your help.
Gary
A common trick when repainting is to just have the molding on the fender/quarter between the wheel opening and the bumper, and just make the door look respectable. If you look through the pages of 5.0 and MM&FF, you'll see a *lot* of this on the foxes.
Now, if you're not repainting... that might be a whole different ballgame. Good luck finding some.
JS
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.