Hi
I have just got hold of a pair of fog lights for my 306 i have pulled of the blank plate to find the connectors and wiring in place i have looked in the fuse panel no luck the haynes manual says they are labelled PA2 and PA3 they seem to go back to the car with the main wiring - Peugeot parts dept told me the wires shouldn't be there and i require the kit
Anyone with any ideas?
AMW
Assuming it is wired the same as mine, then it should use fuse F6 in the passenger compartment fusebox which is 10A. There should also be two green relays/sockets in the middle, the top one is the fog lights, the bottom one is the electric windows.
The fog lights would normally be controlled by a switch on the indicator stalk, which you probably won't have, but you can check and see if the necessary wires are there on the connector block.
-Mark
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.