Hi
Got the above car and it has an issue with the indicators and also main beam. If i use the indicator stalk to turn on the indicator nothing happens unless i twist the 'cowl' that covers the steering column to the left slightly. After i have done this the indicators work fine.
I presume its just a loose connector or something but is this easy to dismantle and fit back together? Its getting a little annoying and was a bit dangerous until i could work out how to get them to operate.
thanks
Tom
no-one replied so i removed the cowling around the steering column and the wiring loom where it plugged into the indicator switch was loose so i clipped it back in and all is good again.
no-one replied so i removed the cowling around the steering column and the wiring loom where it plugged into the indicator switch was loose so i clipped it back in and all is good again.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.