Info on Vibe antenna

Feb 17, 2006 4 Replies

I need to know how hard is it to mount and reattach an Antenna for a Vibe 2005. It snapped off. I can screw it on but I can it not clear to me how a new unit would be replaced. Can I get the parts from a dealer and do it myself is it involved? Thanks.


--


Are you wanting to replace the mast or the complete antenna including the base?

Is this information of any help?

Document ID# 1257802

2005 Pontiac Vibe - FWD

-------------------------------------------------------------------------------- Fixed Antenna Replacement

Removal Procedure

Remove the radio antenna. Pull back the rear compartment trim panel for access. Disconnect the antenna cable (2) from the radio antenna bracket (3). Remove the screws from the radio antenna cable. Remove the radio antenna bracket (3). Pull the radio antenna bezel (1) from the quarter panel.

Installation Procedure

Press the radio antenna bezel (1) into the quarter panel opening. Position the radio antenna bracket (3) to the inner quarter panel.

Install the radio antenna cable screws. Tighten Tighten the screws to 10 N·m (89 lb in).

Connect the antenna cable (2) to the radio antenna bracket (3). Install the rear compartment trim panel. Install the radio antenna.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required