O.K. Quick run down, I had the starter check and its good, The battery is new and fully charged. What I did I connected the battery and test light the cable that connects to the starter, its good, power is going though the cable, then I had some one turn the ignition key all the way and i test lighted the small ignition wire that goes to the starter, test light shows its good. Now when i put it all together and install it back into the car and turn the key nothing happens, I also tested the small ignition wire with a test light while connected to the starter and it doesn't have power going though it, but when i test the wire by itself its shows power going though it, someone please help i'm lost on this and about to go out of my mind......
- posted
19 years ago