Can someone please talk me through how to replace the bulb that illuminates the rev counter on a 2003 L200 please? Speedomemter is illuminated just fine but rev counter is not.
Replacing rev Counter Bulb ('03 L200)
Mar 06, 2006
1 Replies
Found the procedure at SaturnFans.Com. Here it is if anyone needs to know:
Replacing Tacho Bulb bulb replacment isn't that difficult. there isn't that much to remove. the dash doesn't have to be removed.
-remove the 2 screws that are going up into the gauge cluster bezel.
-remove the knee bolster (lower panel of driver side dash), it just clips on. you will find 2 screws under the bolster on the lower part of the bezel.
-put the steering wheel in is lowest position.
-remove the bezel surrounding the gauge cluster.
-remove the 4 7mm bolts that hold the cluster to the dash and carefully remove the cluster. you will find the bulb you need to replaced is in the back of the cluster.
-then put it all back together. should take 30 mins. if you take your time.
the only tools you will neeed is a phillips screwdriver a 1/4" rachet a
6" extention and a 7mm socket.Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required