Automotive Technologies

  1. Home
  2. Automotive Technologies
15186 Threads Posts
to

Worth reading in Automotive Technologies

1994 altima transmission problem

Can anyone give me a suggestion on the next thing to try. The problem: The shifter will manually go into the drive, rev...
0 comments posted 19yrs
posted by brandicaudill
0 comments posted 19yrs posted by brandicaudill

Do I need a break job ?

I'm starting to feel, when I apply break, a bit of "wobbling" in the steering wheel What does this mean ? need new pads...
7 comments posted 19yrs
posted by userjohn
7 comments posted 19yrs posted by userjohn

AC in '94 Honda Accord won't blow

I have a '94 Honda Accord with about 160K that's been maintained very well. In the morning when it's only in the mid 70...
2 comments posted 19yrs
posted by beckyavery
2 comments posted 19yrs posted by beckyavery

1987 V.8 Carburater (electric) Caprice Classic

I need to know what is wrong with my car before i go off to college so i can get it fixed. One day I stopped at a stop...
6 comments posted 19yrs
posted by tbird3303
6 comments posted 19yrs posted by tbird3303

S10 blower resistor/HVAC

My 1996's S10 blower quit working. My AC was out too, so i did not pay much attention to it this summer. I looked at it...
3 comments posted 19yrs
posted by sound
3 comments posted 19yrs posted by sound

Check engine light

1995 Toyota Tercel. Bought it at 160,000 miles and the seller says that nobody is able to cancel the "Check Engine" lig...
6 comments posted 19yrs
posted by ivan
6 comments posted 19yrs posted by ivan

Melted distribution cap - Subaru Legacy 1991

Hi, any idea what will cause a destribution cap to melt? the car is a Subaru legacy 1991. the car was working fine until...
0 comments posted 19yrs
posted by ido.hadar
0 comments posted 19yrs posted by ido.hadar

240sx 1992 - a/c condenser RE/Re question

Hi there, This may sound ridiculous but does anyone have first-hand experience pulling an A/C condenser out of a 1991 N...
3 comments posted 19yrs
posted by anixon1
3 comments posted 19yrs posted by anixon1

connect 10mm tube to -6AN?

I need to connect a 10mm steel tube to a hose assembly with a -6AN end. now 10mm is real close to 3/8" so I am tempted...
8 comments posted 19yrs
posted by njnagel
8 comments posted 19yrs posted by njnagel

97 GMC Sonoma 2.2L Fuel Pressure Relief

I am trying to do what I thought was a simple fuel filter change. However, I am having suprising difficulty determining...
2 comments posted 19yrs
posted by inboxjm
2 comments posted 19yrs posted by inboxjm

Infiniti - Bizarre Noises

I've got an 2006 G35 Coupe with a/t, only 4,500 miles. On a cold start, I hear a strange grinding noise that lasts for...
1 comments posted 19yrs
posted by john.karasek
1 comments posted 19yrs posted by john.karasek

Acetone

I just returned from a long (230 miles) drive, to visit my son, and with the acetone in my old car got 34.5 mpg up from...
13 comments posted 19yrs
posted by hakone
13 comments posted 19yrs posted by hakone

where to find crimp tool?

I'm looking for a crimp tool that will do factory-style crimps on the little electrical connectors used on European car...
8 comments posted 19yrs
posted by njnagel
8 comments posted 19yrs posted by njnagel

02 silverado rear brakes

How do you get the rear brake disk/drums off, I relaxed the cables but they are still catching on the e/brake shoes.
2 comments posted 19yrs
posted by markhabbi
2 comments posted 19yrs posted by markhabbi