Automotive Technologies

15186 Threads Posts
to

Wheel Bearings or Warped Rotor Chevy Caprice

Hi, Would bad wheel bearings possibly cause pulsing while braking? At 40 mph with light braking I get a sharp wobble in...
3 comments posted 21yrs
posted by unreelistuk
3 comments posted 21yrs posted by unreelistuk

Dealer left out 3 quart of oil - advice?

Hi- The local Dodge dealer changed the oil on my Grand Caravan and only added 2 quarts of oil. That was 2 weeks and 400...
32 comments posted 21yrs
posted by baugh
32 comments posted 21yrs posted by baugh

sealing a trans pan

Have a recurring trans pan leak at the rear. Fixed it 5 years ago when filter was changed with a new pan gasket, no sea...
4 comments posted 21yrs
posted by nemesis
4 comments posted 21yrs posted by nemesis

Location of Blower Motor on 2001 DeVille

Can anyone advise me as to the location of the blower motor and how easy it would be to replace? Thanks. Frank
0 comments posted 21yrs
posted by frank1492
0 comments posted 21yrs posted by frank1492

Fuel line removal and install

I have a rubber fuel line under the car (93 Sundance) which is leaking and I want to change it myself. However, one end...
3 comments posted 21yrs
posted by e62836
3 comments posted 21yrs posted by e62836

1990 Mustang rack and pinion

I have a power steerring fluid leak coming from the rack and pinion. Can just the seals or somethign be replaced in the...
2 comments posted 21yrs
posted by stryped
2 comments posted 21yrs posted by stryped

cavalier+stall

Have a 95 Chevy Cavalier. Stick. 152,000 miles. The thing is stalling out. In the begining, I was getting some hesitati...
2 comments posted 21yrs
posted by denaman
2 comments posted 21yrs posted by denaman

2000 gmc safarri

My van is hard starting in the morning. After it starts, it chugs like it is not getting enough gas for a few minutes a...
0 comments posted 21yrs
posted by sbianco
0 comments posted 21yrs posted by sbianco

Antiseize compound? Graph Vs. Copp

Is there any advantage to copper based antiseize compound? Does it last any longer? I don't think of copper as being ant...
2 comments posted 21yrs
posted by mab992
2 comments posted 21yrs posted by mab992

Help me diagnose the problem....mazda...

OK - I have a Mazda 626, 102K miles, automatic, 4cyl. No serious issues in the past. Just normal maintenance & normal r...
6 comments posted 21yrs
posted by unc27932
6 comments posted 21yrs posted by unc27932

289 4bbl Carb

I'd like to swap out the existing 2V Carb with a 4V on my 67 289 Fastback. I realize that i will have to get a 4V Intak...
9 comments posted 21yrs
posted by tkassam
9 comments posted 21yrs posted by tkassam