Automotive Technologies

  1. Home
  2. Automotive Technologies
15186 Threads Posts
to

Worth reading in Automotive Technologies

98 Venture: strange locks/lights situation

Hi All, I have a '98 Chevy Venture LS with power doors and locks. It has about 95K miles on it. Last week I noticed som...
1 comments posted 22yrs
posted by chrissv
1 comments posted 22yrs posted by chrissv

Air Induction

I was just wondering if there could be a potential conflict with the mass airflow sensor in installing a cold air intake...
4 comments posted 22yrs
posted by efstathios
4 comments posted 22yrs posted by efstathios

Elantra oil problem

Hey everyone, One of the cars I own is a 1995 Hyundai Elantra GLS about 90K miles, no need to express your pitty. Recen...
5 comments posted 22yrs
posted by efstathios
5 comments posted 22yrs posted by efstathios

window channel and belt reveals for 92 S10

Can anyone recommend a source for replacement window channel and reveals for my son's 92 S10? When I was in auto body s...
1 comments posted 22yrs
posted by scott
1 comments posted 22yrs posted by scott

Taurus tie rod ends...

I was told that I need to have my tie rod ends (both inner & outer) replaced. I have a 1998 Taurus SE sedan with the DO...
1 comments posted 22yrs
posted by zoggin1970
1 comments posted 22yrs posted by zoggin1970

Chevy Van 1975 Hydra-matic transmission problem

Chevy Van 1975 G10 series, 350 V8, with hydra-matic transmission. At start-up the transmission will not shift into any...
3 comments posted 22yrs
posted by ggrant
3 comments posted 22yrs posted by ggrant

99 Olds Intrigue 3.5L engine knock

Hey all, I have a 99 Olds Intrigue GLS with the 3.5L Shortstar engine. It has a definite knocking sound that occurs on...
1 comments posted 22yrs
posted by chrsmoos
1 comments posted 22yrs posted by chrsmoos

Car alarm problems - 2000 camry

I have a 2000 Camry I just had an alarm installed (Pacific Audio, Sacramento, CA - don't know what their rep is, I woul...
4 comments posted 22yrs
posted by meese
4 comments posted 22yrs posted by meese

1600 VW oil pump GPM flow?

Thinking of diverting the flow from the stock oil pump to run a small hydraulic motor then back to lubricate the engine....
3 comments posted 22yrs
posted by mcgeepby
3 comments posted 22yrs posted by mcgeepby

Piston Slap

I have had this on my Integra starting at 100k for about 6 years and 60k miles. After the car is warm, the knock disapp...
4 comments posted 22yrs
posted by martik
4 comments posted 22yrs posted by martik

tension on drivebelts

Does anyone use the Burroughs or Nippondenso tensioners or do you just tighten it up good and don't worry about what th...
1 comments posted 22yrs
posted by rowest
1 comments posted 22yrs posted by rowest