Automotive Technologies

  1. Home
  2. Automotive Technologies
15187 Threads Posts
to

Worth reading in Automotive Technologies

Tie Rod Ends

So I just got a good deal on 8 tie rod ends for my project. The new parts are TRW Federal Mogul 11-ES-0212's & 0213's (...
3 comments posted 23yrs
posted by edprice
3 comments posted 23yrs posted by edprice

1989 Subaru GL will start but won't run

After replacing the engine in our 89 subaru GL it will start but when you release the ignition it won't run. It's not g...
2 comments posted 23yrs
posted by longweeve
2 comments posted 23yrs posted by longweeve

pls help: rod caps too loose?

hi anyone, this is a troublesome problem. i got a 92 Chevy Corsica V6. i took off two of the rod caps to inspect the be...
10 comments posted 23yrs
posted by beavisnbutthead
10 comments posted 23yrs posted by beavisnbutthead

which shop manual 1986 escort & 1995 taurus?

I haven't tinkered much with cars since my '66 Dart days, so I'm pretty much in the dark every time I lift the hood. Bu...
3 comments posted 23yrs
posted by Elbrecht
3 comments posted 23yrs posted by Elbrecht

how to remove starter in V6 3.8L olds ?

Guys, I have a good condition 1988 olds cutlass ciera with 3.8L V6. It has never give me any problem. I has been mainta...
5 comments posted 23yrs
posted by oscarctnyw
5 comments posted 23yrs posted by oscarctnyw

help with 02 sensor location

1996 Chevy Blazer 4.3 2wd.... Hi, Looking under the car to locate the sensors, I see four of them. My scanner says: B1-...
6 comments posted 23yrs
posted by hakone
6 comments posted 23yrs posted by hakone

Honda Civic oil

I have a 1995 Honda Civic, standard, and about 80,000 miles. I usually put 5W30 in it but someone told me I should be us...
22 comments posted 23yrs
posted by sadsunysky
22 comments posted 23yrs posted by sadsunysky

Coding Information 1996 Grand Cherokee

Anyone have the code listing for a 1996 Grand Cherokee? I had some problems, but I think I got it fixed with a good tun...
2 comments posted 23yrs
posted by rngri4
2 comments posted 23yrs posted by rngri4

Re: got a 2nd opinion on my Olds today

You are just plain describing something electrical/electronic in nature, not a burned valve or lifter! Mike 86/00 CJ7 L...
7 comments posted 23yrs
posted by romainm
7 comments posted 23yrs posted by romainm

01 Cavalier Fin

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Need bulb replacement procedures. It's not in the owners manual and deale...
1 comments posted 23yrs
posted by jspence31
1 comments posted 23yrs posted by jspence31

OK, I know they recommend ....

...to change the timing belt at 60k (97 Mazda 626). But for those of you who actually change them and see the old ones...
15 comments posted 23yrs
posted by lobshot694
15 comments posted 23yrs posted by lobshot694

84 633csi No start

Hi all: A friends 84 BMW 633csi wuold crank but not start after replacing spark plugs. The car would only run when the...
0 comments posted 23yrs
posted by ghodave
0 comments posted 23yrs posted by ghodave

Mazda Air Filter

Don't laugh, but is there something I'm missing in attempting to remove the plastic housing cover, to replace the air f...
0 comments posted 23yrs
posted by WDS
0 comments posted 23yrs posted by WDS

ISO 9141 Protocol Documents for OBD-II

I'm doing some research on OBD2 but I can't find these docs to save my life. If anyone knows where I can get them or co...
1 comments posted 23yrs
posted by my93mazdarx7
1 comments posted 23yrs posted by my93mazdarx7