Celica broke down on the way to work...

Yesterday. Now, for a long, long time, I have driven 50-60 miles one way to work, and as my Corolla was aging, it often broke down on the road...at the OTHER end of the road from home. I often had to have it serviced at a certain dealer in the Berkshires who shall remain nameless, particularly due to the premium they charged for service and parts!

So, yesterday I was about 3/4 miles from work. First gear, second...third four...four....UGH! Clutch pedal stuck to the floor and no way to shift into any gear (without trying to hit the syncros, of course...) luckily I had enough momentum to park it right in front of the service dept! This time, breaking down at work worked in MY favor!!!

New clutch slave cylinder and 15 mins later...

The sad part: I bought one 2 years ago and never replaced it...it's sitting on a shelf in my garage... :(

Reply to
hachiroku
Loading thread data ...

The shoemaker's children go barefoot...

Reply to
Ray O

Same thing happened a couple years ago on my '89 Prelude. Also clutch slave cylinder. PITA.

Reply to
Dave L

Just to make sure, you DO understand I just started working at a Toyota dealer, right? ;)

Not before, though. The damn thing would break down the furthest point from home, usually in just about the worst place it possibly could (in the middle of the Boondocks...)

Reply to
hachiroku

and mechanics drive s-boxes? See my response to L-R. I have been keeping an eye on it.

I believe it was the original cylinder.

And YOU know who I mean by an overpriced dealer in the Berkshires, eh?

Reply to
hachiroku

Me and a friend had to work on replacing a clutch slave cylinder once. Couldn't afford to take it to the dealer. The local dealer down there had a real bad reputation, anyway.

Long ago in a galaxy far away . . . .

Charles of Kankakee

Reply to
n5hsr

Oh, wait - this is the Toyota newsgroup! No really - I thought it was ironic that what happened to your Toyota is exactly what happened with my Honda - clutch pedal stuck to the floor. And yes, I saw you recently started working at a Toyota dealership!

Used to have an '86 Celica 5spd, but no more....

-Dave

Reply to
Dave L

Oh, OK!

I have replaced 4 master cylinders: 1972 Corona MKII in 1977, 1980 Corolla SR-5 about 3 months after I bought the car NEW (then never touched it for

210,000 miles...), 1985 Coroll GTS at 247,000 miles, and this Celica. Never done a slave cylinder before.

But I HAVE done a fair amount of "Synchro-Shifting!"

'85 was a bigger car with a bigger engine. But the '86s are cool ,too.

Reply to
hachiroku

Actually, it was 2 screws and a fitting...bleeding took longer than replacing!

Reply to
hachiroku

We also worked on replacing the rear brakes at the same time. He knew how to work on them, they were basically the same as the Bendix Aviation brakes he worked on at work. He even had some specialized tools to work on brakes with.

Charles of Kankakee

Reply to
n5hsr

Sells Pontiacs too?

Reply to
Ray O

Bing-o!

guy takes my AC system apart, and then leaves it like that and splits cause it's a Friday afternoon (after I BOOKED an appointment!) and still charges me $450!!!

Reply to
Hachiroku

I spent a lot of time there getting them to do good work in a customer friendly manner. Sounds like they must have forgotten some of that in the

15 years since I last visited them!
Reply to
Ray O

Six years...that was back in '96, with my 11 year old 'hachiroku'...

I'm *afraid* to ever go there again! My bank account isn't big enough!

Reply to
hachiroku

There was a dealer up here that wanted $2200 just for parts. What he really wanted for us to junk the Previa and buy a new vehicle so he could foist the Previa off on the Mexicans. They basically didn't want to service vehicles more than 8 years old.

Charles of Kankakee

Reply to
n5hsr

No one wanted to work on my Celica! I asked the boss, just get it in the air! I'll take care of it, but one of the techs had it off before I got back to the lift with the part! So, i'll be detailing his wife's car next week!

Reply to
hachiroku

Hmm, revenge is a dish best served cold. It is very cold in space.

Charles of Kankakee

Reply to
n5hsr

Oh, no, I meant it was a good trade. I got to leave work to go play some bass on time, so it is well worth it! Otherwise using hand tools it would have taken me that much again!

Reply to
hachiroku

Oh I see. I thought he was messing with you. Sometimes they do that to the new guy.

Charles Who's been the new guy entirely too often in his life.

Reply to
n5hsr

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.