having trbl removing the clip from the defroster pad using repair kit that says remove clip but not how clip in pad real tight any suggestions on removal for the guy who needs repair info go to
If you are using conductive paint to repair scratches in the defroster grid, you do not have to remove the clip unless the pad that holds the tab that the clip attaches to broke off the glass. I believe the clip has toothlike tabs to hold on to the tab. If the tab is not attached to the glass, you may be able to fit a very small screwdriver like the kind you use to repair eyeglasses to get the tooth off of the tab.
Ray O thanks very much for info will try that mafg of kit never responed to how to remove cilp from pad guess they never did it but make kits for both Vain & Pad Repair bigben
What are you trying to repair? Did the terminal fall off of the grid or is the grid just scratched? If the grid is scratched, there is no need to remove the clip from the terminal.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required