My daughter recently purchased a 95 Camry with 66,000 miles. I noticed that the dome light only comes on when the front passenger door is opened. The dome light does not come on when the other 3 doors are opened.
The dome light comes on intermittently if I wiggle on the switch which is behind a rubber cover. I removed the bolt from the switch and cleaned the ground connection. Still no go. I then removed the rubber cover and remounted the switch. It still is intermittent. The other 2 door switches behave in the same manner.
I concluded that all 3 switches are bad and need replacing. I was going to switch the good switch from the passenger side over to the driver side so when she gets in the car at night, the dome light will work for the drivers door but I can't figure out how to remove the wire from the switch without breaking it. It looks like it is a right angle quick connect type connector and I tried pulling it straight up but it won't budge. It looks like the terminal might have a locking tab on it. I tried putting a small screwdriver blade in the small rectangular hole in the side of the switch and pulled up on the terminal but it still won't budge.
Does anyone know how to remove this wire without destroying it?
Thanks,
Ric