I drive down to the supermarket and notice my front right side marker is out. The bulb is probably blown. With a screw driver in one hand and a spare bulb on the other, I open the hood. Then I begin to look for a screw on the side marker's lens to loosen. To my surprise, there are none. I have no idea how they hide the screws. What is a practical way to replace a side marker bulb?
Thanks
Toyota -- should be simple -- Push 'N Twist - either under the hood or perhaps under the front fender!
BBA
It is outlined in the manual
Thanks guys. I went looking for a Push 'N Twist but found no access. So, here's how I got the lens out.
1) Remove an upper screw which I didn't see before. 2) Pull the lens towards yourself.The bulbs aren't blown. Turns out, the female connectors are corroded. Put in new female connector and it's set to go.
--
94 Lexus V6 ES230Have something to add? Share your thoughts — no account required.
Ask the community — no account required