car is mazda mpv 98, front turn signal bulb has dimmed (compared to other side) and results in a rapid blink (as opposed to the opposite side normal rate)
how is the new bulb replaced, there does not appear to be any screws to open the orange signal cover?
Not answering your question, but may be pertinent. The symptoms you describe can often occur because the rear bulb is not flashing at all--resulting in the rapid flashing, and resultant less brightness due to shorter time of current flow thru the front bulb. The rear bulb may need the attention. HTH, s
I had carefully taken the required steps from front to back to see that all bulbs are flashing before writing the OP.. still looking for a solution to front side signal
Have something to add? Share your thoughts — no account required.
Ask the community — no account required