How to Change right front turn signal bulb on 98GC

Cappy2112 did pass the time by typing:

If it's like the 93 then you take out this screw for the side marker

Then carefully remove the lower screw by inserting a thin phillips driver here You can then take out the lower screw that holds the lamp in

Great Thank you !!

Any idea how to get the speaker grills off of the front Left & Right speakers? I have the Infinity Gold system- and I think my speakers are shot or the crossover is fried.

Do I have to take the door panel off ?

L.W.(Bill) Hughes III wrote:

Thanks again- but do you have any references for 98 Jeeps ? This page is for 99 and onward, and the headlamp assy is quite different. My headlamp only has 1 bulb, not the 5 as in the picture.

As such, now I have the headlamp out, the turn signal (which is what needs to be replaced) is in the wraparound assembly, again, with no visible screws/fasteners.

This is what needs to come out, so I can replace the turn signal bulb

L.W.(Bill) Hughes III wrote:

The post that followed Bill's probably answered your question and is complete with pix!

Cappy2112 did pass the time by typing: > I need to replace teh right front turn signla bulb on a 98GC. > i've removed the battery but only see the bulb socket for the main > headlight.

If it's like the 93 then you take out this screw for the side marker

Then carefully remove the lower screw by inserting a thin phillips driver here

You can then take out the lower screw that holds the lamp in

-- DougW

begin 666 dot_clear.gif K1TE&.#EA`0`!`( ``/___P```"'Y! $`````+ `````!``$```("1 $`.P`` ` end

Sorry. Like Bill said, use the the '93's instructions by Doug: If it's like the 93 then you take out this screw for the side marker

Then carefully remove the lower screw by inserting a thin phillips driver here You can then take out the lower screw that holds the lamp in

-DougW

I finally got the turn signal bulb out- but it still worked. I've re-connected everything and the turn signal works fin noe. NMust have been a lose connection. Curse GM for using torx screws.

Thanks for all the > Sorry.