Hey all...I've got a 91 2WD manual pickup with a 22-RE and there are two bolts on the starter...anyone know the size to buy?
Thanks for any help...
Hey all...I've got a 91 2WD manual pickup with a 22-RE and there are two bolts on the starter...anyone know the size to buy?
Thanks for any help...
"Mike Pannell" two bolts on the starter...anyone know the size to buy?
Probably the ones that fit.... maybe take one out and match it up???
A dealer could tell you if they are missing.
----------------- TheSnoMan.com
Duh...they are not in there...thanks, maybe next time...
Thanks
14mm X 1.25mm pitch bolts, approx. 2.5" long (you can figure this part out). I think stock bolts are metric grade 10.9 hardness.
Toyota MDT in MO
10mm X 1.25mm thread pitch bolts, approx. 2.5" long (you can figure the length out). I think the stock bolts are metric grade 10.9, which is near equivalent to Grade 8 in SAE. I'm sure you could make do with the more easily obtainable 8.8 metric grade bolts if necessary. The bolt heads are 14mm from the factory; aftermarket hardware suppliers usually use 14 mm heads on 10 X 1.25 bolts/nuts as well.
Toyota MDT in MO
Sheesh....You said "there are 2 bolts on the starter" ... you *DIDN"T* say that you were missing any of them
thank you ... very much appreciated
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.