Help with 68' Westy....instrument panel removal

Jul 29, 2005 3 Replies

I have a 68' Westy with an odd electrical problem. With the headlights off the signals, both left and right, work and the dash indicators work. With the headlights on, the right signal works and the dash indicators work. The left signal works outside, but the dash indicators work about every second or third flash. Although it does not appear to be a loose connection, I would like to verify all the connections under the instrument panel. I removed the four screws holding the panel in, but don't know how to undo the heat and fresh air controls so I can tip the panel out.



Question 1. Ever heard of the problem with the dash signal indicators? Question 2. How do I undo the heat and fresh air controls so I can easily get to the control panel wiring?



Thanks



Look carefully at the knobs on the heater levers and see if your year has the tiny plastic pins. You have to push the pins out to release the knob.

The only way I have found on the early '68 is: Remove the cables from the levers - outer liner clip and inner spring clip. Remove the "nyloc" nuts securing the axis of the levers - remembering how all the nylon and steel apacers go. Remove the speedo cable Remove the Steeing wheel (optional)

Grahame from Aus

Yuck! How about you coming up to the Green Bay area and showing me how. I'll take you to a Packer game????:)

Drop me a line: snipped-for-privacy@yahoo.com

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required