Rust on S70 ignition key

Oct 15, 2005 1 Replies

The plating has worn off the side of my 98 S70 ignition key and rust is forming. What is the best remedy?


3 paths-

path1: assume that the plating on the key was poor. Has it "worn" or "peeled/flaked" off? If worn, that is not very long for a key to wear like that. I would make sue tha tthe locks are lubricated with dry graphite (NEVER use a wet lube in a lock, no matter what the can/bottle says). If flaked, then I would worry about where all those bits of chrome went.

path 2: There is a problem with one of the cars's locks- presumably the door or ignision lock that is wearing off the chrome.

path 3: You keep the key on a keyring next to other keys that are wearing off the chrome as they rub together in your pocket/purse/whatever.

If this is one of the later digital/chipped keys, they are expensive to replace.

__ __ Randy & \ \/ /alerie's \__/olvos '90 245 Estate - '93 965 Estate "Shelby" & "Kate"

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required