golf gti abf valve timing

hi everyone. i have a golf gti 16v abf engine. can any one send me a diagram or explination of the cambelt timing and the position of the inlet cam that is chain driven.

thanks very much asap despiratly needed

Reply to
john2727
Loading thread data ...

You need a repair manual! Or access to one. ;-)

Here is an explanation but the much desired pictures seem to be missing. :-(

formatting link
"ah yes, timing the 16v. timing belt and tensioner should be replaced every 60,000kms (as per VW), but it's your choice when / if you replace it. Why roll the dice?

anyway, here are some picture of the timing marks on a 16v. the transaxle / Flywheel mark is accesable under a plastic green screw on cap (no pictures of it - sorry), but it is on the driver side - where the transaxle mates to the engine. It's on top. you can't miss it.

The cam marks are on the inside (drivers side) of the pulley.

The crank pulley marks are on the crank (obviously) - but these line up to the plastic lower timing belt cover - and is not that accurate. the crank pulley and flywheel sping at the same rate, so use the flywheel mark.

The dot on the flywheel is 0° and the notch is factory timing.

ok, now for the pictures....

crank marks (line up with "V" notch on transaxle housing)

Another shot of the whole flywheel

Cam timing mark

Another cam mark

And the distributor (plug wires info and rotation)

that's it for now... "

Reply to
dave AKA vwdoc1

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.