brake master cylinder

I was told the brake master cylinder was 'recent' when I bought the
land rover a year ago, it looked 'recent' however the thing is now
leaking.
As far as I can make out it's leaking from the seals between the
reservoir and the cylinder.
Is this likely? seems an odd place to leak from as it's not under
pressure. the inner wing below it was wet with hudrolic fluid so I
tied a clean rag around the cylinder and reservoir for a couple of
days and today it was soaked but the copper pipes and joints seem ok.

can I whip off the reservoir and pop-in a couple of new seals? or is
it more complicated than that?


Regards.
Mark.(AKA, Mr.Nice.)
--
_________________________________________
www.markvarleyphoto.co.uk
1984 110 CSW 2.5(na)D
(3,000 rivets flying in close formation)
_________________________________________




................................................................
       Posted via TITANnews - Uncensored Newsgroups Access
             >>>> at http://www.TitanNews.com <<<<
-=Every Newsgroup - Anonymous, UNCENSORED, BROADBAND Downloads=-