Audi A4 2000

Dec 15, 2004 2 Replies

Does anyone know where the relay for the turn indicator is on a 2000 UK spec A4 model?. I've found a list of fuses & their location in the manual, but no mention of indicator relay. I'm assuming the relay needs replacing, as the indicators work sometimes, but then stop for no reason, sometime after one or two blinks, sometimes after several, sometimes not at all. The hazards work fine.



Thanks,



Trish


I think it's part of the hazard switch in most current Audis.

"Trish" wrote

Yup. Peter Bell is right - the turn signal/hazards relay is integrated with the hazards button (red triangle) in the center console just below the vents. So, you need to replace the whole thing (the relay and the button - it's one box). And yes, your assumption is correct - from what you're describing it's definitely this relay that should be replaced. It's a very common issue, at least in the A4. I had mine replace just a few months back.

Cheers,

Pete

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required