Spoiler - how to remove, and hide holes?

I am contemplating removing the rear spoiler on my 2005 Focus ZX4-ST, as it blocks too much of my rear view. Since I want to re-attach it when it is time for resale, I want to use a small removable plug, rather than bondo, to disguise the four mounting holes. I was thinking of chrome or stainless carriage bolt . Any alternative suggestions? Thanks, Roger

Reply to
Roger
Loading thread data ...

Plastic / hard rubber plugs - designed for that application - painted body color & w/ flex additive are your best option. Seal them in with a good clear silicone and they will come out easy when required.

Now for some bad news - you may need to be sure to leave your spoiler outside for as much as the car is to avoid mismatching due to fading.

Good luck w/ that...

Rob

Reply to
trainfan1

Don't remove it! Just put some phone books on the front seat, just high enough so you can look over the spoiler. It will also give the people who you pass on the road the appearance that you are a big badazz. Seriously go to Home Cheapo or Lowes and buy some plastic "push rivets" (they look like mushrooms) and use a dab of clear silicone to seal out the weather. Paint rivets with a close match "plastic only" paint, prior to installation. Total price should be about $6.00 as long as you don't have to drive 100 miles to the store.

Reply to
chuckster

Reply to
dmtaurus

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.