Just changed the top and bottom drivers door hinges. I had painted the
hinges prior to installing them. Put them on and put everything together and
the push button for the door locks (which are electric) and the all the
locks don't open or close. If you manually push the little lever to the
closed position, and then hit the electric open side, the drivers door will
unlock only. Will not make a sound when the close side is pushed.
I figured that painting the hinges especially on the mating sides might be
interfering with the ground in some magical way, I took them off again and
sanded them on those mating sides.Reinstalled them and still have the same
problem. Everything worked prior to swapping the hinges. Checked the fuses
and even swapped out the passenger side door lock switch and still does the
same thing. I know its not the switch because it works fine on the other
Is there anything else to check guys? Does this system work on the grounding
of the door to the body?