A case of death wobble today

Feb 20, 2004 98 Replies
3/16" toe in is excessive for large tires, one wheel with total=20 of 12 oz is a LOT. That will kick off DW, fix those.

**NOW** you can go change the stabilzier!!

Cheers.

Terry Jeffrey wrote:

Yep, I have one on order. It's hard to find a good stabilizer in this town. Got a pre-72 CJ style stabilizer with bracketry on the way since the stock bracketry went away with the D30 I replaced.

Terry.

3/16" toe in is excessive for large tires, one wheel with total of 12 oz is a LOT. That will kick off DW, fix those.

**NOW** you can go change the stabilzier!!

Cheers.

Terry Jeffrey wrote:

Yes, total of 6oz not 12.

I tried it out without the track bar but with the old stabilizer just to see how she handled. Not as bad, but still some wobble. I again took it to another different mechanic for another look. 3rd time's a charm. This guy seemed to know his sh*t more than the others. He found some slight play in the drag link end where the drag link meets the tie-rod that I overlooked. I will replace both the sleeve and the end to get a good snug fit. Betcha this is the root cause. But looks like it had an array of small problems that finally added up to the DW.

Terry.

Hey A*****e, he had a tire well out of balance, he has well worn=20 tires, he has way too much toe in for 35" tires (not the 1/8" you=20 like for **32***" tires and I AGREE that 1/8" is good for 32's)=20 and all you say is "Replace the stabilzer"

All I said is look for the real problem BEFORE you change the=20 stabilzer" If you had your way, he would not have looked for root=20 causes. If you were the mechanic that sent him on his way with a=20 "fix" you would get to defend yourself in court.

L.W.(=DFill) Hughes III wrote:

Well, if you knew your head from the other end, you would note=20 that the second picture does NOT have stock springs, too much=20 arch. If you look at the first picture, you will note that the=20 angle does not show the back end of the spring where you=20 typically get bending due to spring wrapup.

Now what point were your trying to make? Please be clear in=20 showing ALL of us exactly what what happens when you abuse a=20 spring and what effect it has on the caster?

Not so cheers.

L.W.(=DFill) Hughes III wrote:

... and you're pretty handy with a comb. Did you use WD40 or STP?

Your shoot-from-the-hip diagnostics are one of the reasons I stay tuned to this group. Keep it up.

formatting link
Can you lube your joints with that stuff?

HAH! This must be the stuff that Sargent Carter used in Gomer Pyle!

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required