Hi all,
I have a 95 YJ and I want to remove the step/flare beneath the door, and put on some aluminum diamond plate. Anything I need to know before I bolt it on? Anything to help prevent future corosion in that area. It is solid now, no rust, but I don't want to give it anyplace to start. I'll take any and all suggestions.
Thanks you,
Greg
First thing I think of when I see diamond plate is " that guy is trying to hide some holes".
Snow...
Every place aluminum contacts steel, you will have a hole burned through in short order from electrolysis.
Insulating under it will just hold water and rot it that way. Gluing it on with butyl might work...
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06
This is just a suggestion, but I have noticed that the diamond plate rocker panels are also made from UV treated thermoplastic that bonds to the vehicle with super duty 3M double sided tape. I have seen them in black, and they look nice. I don't know about anyone else, but for me unless you stand right up close to it, you can't tell it's not metal. And this thermoplastic may eliminate your problem of metal touching metal and causing corrosion in the future. As I said, just a suggestion.
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.