pulling axle shafts w/detroit locker

Hey John, how's it going?

I am not sure, but can't you just take the drum off and pop the studs out with a C-clamp and large socket to catch the stud or a hand vise and socket? I don't think I would want to hammer them out, but...

My 44's axles also just unbolt from the outside, no slide hammer needed.

Mike

Ill go out and try the c-clamp on the studs. I unbolted the retainer plate that holds the brakes on the tube but the shaft is still in there and wont come out.

Thanks

John > Hey John, how's it going?

well I got them. I just used some penetrating oil and a sledge and to install i used the impact with a spacer. oh well, I guess that diff oil needed to be changed anyway,it had about 6k on it.

John > Hey John, how's it going?

No more White Trash, it fell victim to the somebody made me an offer that at the time was prudent to accept. When the situation improved, I replaced W/T with a 98 GC, but Im not allowed to drive it offroad (but she isnt with me all the time haha) I still have the 99 tj and it now is locked F/R with the atlas t-case and 4.88 gears. My son was driving it about 1.5-2 yrs ago and flopped it on its side, I cried for days.

John > Hiya John, I thought you fell off the face of the earth! You still have > White Trash?

If you really have a D44, you don't have any c-clips anyway.

Dropped it on it's side. You gotta love the boy ...

How ya doin JohnEJeep?

well i guess thats why i couldnt find them.

John > If you really have a D44, you don't have any c-clips anyway.

doing great. The boys b-day is tomarrow and I got him a yamaha ttr90 ( the X called child protective services on me for that little flop. They said quads and motorcycles were ok, JEEPs again and Ill be hearing from them again)) to keep him in the dirt. What can a dad do?

John > Dropped it on it's side. You gotta love the boy ...