Question from a lurker.

Jun 12, 2004 6 Replies

I read this group everyday but never have anything really to say. You guys provide great info to everyone that asks.


I have a easy question for you. I am replacing the factory stereo with a cd player. I have the wiring harness but cannot find the wiring diagram for it. I have the Haynes manual but it does not list it either.


This is from the cd player:



formatting link



Now I need the same thing from the jeep.


Thanks in advance!



Cenzo



95 YJ

VJF did pass the time by typing:

Don't have anything for a 95 YJ or I'd post it, sorry. Check the current radio, the one from my ZJ had a wiring pinout on it, yours might also.

If no one has the info here I suggest trying a local sterio store they usually have books or drop by a dealership and ask to read the service manual. I'd give you the colors from the 93ZJ but they might have changed.

Save yourself a lot of hassles and check one of your local stereo stores for one of these:

formatting link
These plug right in to the factory harness plug so you don't have to cut any of the original wires.

Chris

When I replaced my radio I bought the wiring adapter from Crutchfield.

One end plugged right into the Jeep's wiring harness and the other was labeled with the various speaker, power, ground, etc connections. Made the whole thing very easy.

Dean

Much thanks guys! I appreciate your time.

Cenzo

95 YJ

VJF wrote:

Endo did pass the time by typing:

You can. The antenna is usually a standard female spade style. Dimmer power comes from the stock harness but usually main power comes from a new feed. On mine I tapped the dimmer wire and then bundled the old connector back into the dash.

You can buy a pigtail that connects to the vehicle's wiring harness, and splices into the radio's pigtail. The leads are marked. Match them up as you splice.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required