Has someone got one fitted that they could possibly email me a couple of photos of the underneath of it. Also how many, and where, bolt are used to hold it in place
Cheers Mark (remove spam block to email me the pics)
Has someone got one fitted that they could possibly email me a couple of photos of the underneath of it. Also how many, and where, bolt are used to hold it in place
Cheers Mark (remove spam block to email me the pics)
It is held on with 8 bolts.
The standard bumper is held on with 2 bolts.
These same bolts are used.
There's a bracket that uses two large bolts to bolt it to the existing towbar mounts (in the chassis). Then 4 bolts bolt through the bumper and into the said bracket.
It is a very strong bumper although a bit tight on some dimensions. You need to make sure the rear door will pen before tightening up all of the bolts.
Ed
To reply, remove my appendix
Ed,
Thanks for that.
So the bracket that uses the towbar mounts is seperate from the bumper ????
Is it enclosed underneath or open ????
Cheers Mark
I'll email you some photos once I've confirmed your email addy.
Ed
To reply, remove my appendix
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.