Odd request.... 66mm diamiter exhaust end trims

This may sound odd... it is kinda car related.. in a way...

I've got a custom motorbike, and i'm trying to make it more.. mine...

At the moment i've got slash cut chrome exhausts on it, and i really want turn out exhausts.. problem no one makes a set for my bike,

But i came up with an easy way to get turn out exhausts.. the end of my pipes have a short length of pipe inserted in them to hold the baffles in place (they went long ago :) this piece of pipe is also slash cut.. but i've removed it, and if i can find a couple of curved chrome exhaust trims, i can slot them inside the slash cut pipes, point the curved end sidewards rather than downwards as on a car.. and i have a pair of turn out exhausts for a lot less than a new exhaust system...

Here's the snag, the internal diamiter of my exhaust pipes is exactly 66mm, easy to measure.. i measured the outside diamiter of the short baffle holder piece i removed,

I origionaly thought i'd just pop down to a car parts shop that still sells the old style exhaust end trims, and buy 2 curved ones with a 66mm outside diamiter... easier said than done..

Most shops only sell the max power style exhaust trims.. the type to make a

1 inch exhaust look like a 10 inch one.. with led's all round the end and so on..

But of the few shops i've found that still do the old style 'simple' they only go upto 54mm diamiter curved ones,

Does anyone know where i can deffinately get some 66mm external diamiter curved chrome exhaust ends from??

Failing that, i can make some if i can locate some 66mm diamiter shromed tube, that is bent to a 90 degree bend.. i.e a right angle exhaust tube.. needs to be chrome tho.. then i can cut the tube where the bend starts, and give me 2 turn outs,

But again, finding pre-curved tube that's chromed is proving hard, anyone got any laying about?? or know where i can get what i want??

I've been trying to think what else would use this type of bend/size tube.. curved velocity stacks/ram pipes, turbo inlet pipes, intercooler pipes.. but those options seem to be even more expensive than a new exhaust, and hard to get the exact sizes of the bent bits of tube.

Reply to
Hairy Arse
Loading thread data ...

Try Demon Tweaks. They keep all of this sort of kit.

JB

Reply to
JB

You'll have more luck googling for Demon Tweeks though.

Reply to
Doki

JB

Reply to
JB

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.