Re: Changing a CV Boot

May 23, 2004 14 Replies

The message from "AstraVanMan" contains these words:


but I don't think there's much you could
> make out of a CV joint.

It'd make a splendid mace for a fancy dress party if you went as a SciFi warlord or summat. The inner race is all spiky and dangerous looking.

The bolt I used was exactly the same length, bolt head and thread type. Only difference was that the original only had half of the length threaded - the other half (closest to the bolt head) was just solid, and this was the bit that engaged in the groove in the ball joint pin. But I torqued the replacement bolt up properly and there's absolutely bugger all vertical movement of the balljoint (tested with a scaffold pole!) so I can't see a major problem there. Suppose in the long term it could slightly squash the thread and leave to movement which would slightly affect handling/tyre wear, but I reckon it should be ok for a few days until I get the replacement bolt (it'll only take 5 minutes to change so I may as well change it for the correct one).

Peter

The message from "SimonJ" contains these words:

Paraffin works well on molygrease.

Kitchen roll did the trick for me. Lots of it. Then a good wipe clean of all the nooks and crannies (not that there are many) with a rag. Looked lovely and shiny. Then I opened the satchet of grease and made it unshiny again.

Peter

The message from "AstraVanMan" contains these words:

I have a large bag of giant knickers made redundant by the wife no longer being pregnant.

I've got a bag of all sorts of old clothes which make excellent rags, but on the one occasion I could have really done with them, I couldn't find them.

Peter

The message from "AstraVanMan" contains these words:

My money's like that.

It was somewhere around Barstow, on the edge of the desert, when the drugs began to take hold. I remember "AstraVanMan" saying something like:

But threaded all the way up to the head? That's a setscrew, not a bolt.

Good idea. Proper bolts are considerably stronger than setscrews. Setscrews having the nasty habit of shearing long before a bolt would.

The message from "SimonJ" contains these words:

Wot, to get her pregnant again? I didn't know you could advertise things like that on eBay.

Hi Guy

Too big or too small for them now.? (Come on you all thought it) 8~)

You could start a bit of a trade there, advertise them on ebray as celebrities crusties, maybe add an autograph of authenticity as a chargeable extra!

Hi "AstraVanMan"

Perhaps your wearing them??

The message from "Steve Sweet" contains these words:

I've done that on occasion - gone to the rag bag to retrieve a teeshirt when desperate.

The message from "Steve Sweet" contains these words:

Too small - she ain't lugging 8½lbs of baby around.

It was somewhere around Barstow, on the edge of the desert, when the drugs began to take hold. I remember "Steve Sweet" saying something like:

Thanks, I've got some donkeys to sell.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required