Hi
The light on the middle clock (temp and fuel) has stopped working. Managed to reach behind and swap it with the speedo. This showed the bulb to be ok, is it likely to be the contacts on the printed circuit or is there anything else to check. The other two are fine.
cheers
Gary
Hi geepeetee I would suspect the contacts where the bulb holder connects ,, try slowly twisting the holder while the lights are on, the other possibility would be that the printed circuit has burnt out, This would be easy to identify, as the damage would be visible, (but unusual) Fitzy
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.