Does anyone know the procedure to replace the drivers side fog lamp in a 2004 Maxima?
- posted
18 years ago
Does anyone know the procedure to replace the drivers side fog lamp in a 2004 Maxima?
Is it not in the owner's manual?
This is directly out of the factory manual:
Bulb Replacement EKS00599 1. Remove front combination lamp. Refer to LT-41, "Combination Lamp Removal and Installation" . 2. Turn the plastic cap counterclockwise to unlock it from the com-bination lamp 3. Disconnect fog lamp connector. 4. Unlock the retaining spring and remove the bulb. CAUTION: _ Do not touch the glass of bulb directly by hand. Keep grease and other oily matters away from it. Do not touch bulb by hand while it is lit or right after being turned off. Burning may result. _ Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. May affect the perfor-mance of fog lamp. When replacing bulb, be sure to replace it with new one. _ After installing the bulb, be sure to install the plastic cap securely to ensure watertightness. Removal and Installation EKS0059A REMOVAL Refer to LT-41, "Combination Lamp Removal and Installation" . MEL328G LKIA0316E
It is hard not to touch the bulb. Simply wipe it down with alcohol to clean it.
Later, Ralph
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.