stock 03 tundra radio/cd player HELP PLEASE

Hello Folks,

I've got an 03 Tundra with the stock radio/CD/cassette player. The CD stopped working. Everything lights up, the CD feeds in, but then ejects after about 15 seconds. The unit 'searches' but cannot find any tracks. This happens with any CD I've put in there ;^( I used to hear a 'ramp-up' / CD spinning just prior to the player finding the tracks. I do not hear that movement now. Any ideas if it can be easily fixed vs. replaced ? Is it a direct drive motor or is it belt drive for CD player?

Best regards,

Rich

Reply to
RG
Loading thread data ...

You might want to try one of those CD lens cleaner disks. They have inserted on them very fine plastic bristles that clean off the laser's lens when they spin, being that it might be dust covered or dirty in some way perhaps from dusty driving conditions such as off or dirt roads.

Reply to
user

Fixed, thanks for looking

Reply to
RG

What fixed it?

Reply to
Scott in Florida

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.