Please take a look at
formatting link
I need to remove these two plugs and could use a bit of advice before I just start whanging on them with a hammer and chisel.Unplugging Blower Arteries
Nov 21, 2003
3 Replies
Make sure there isn't a screw or anything securing it in place.
If you don't care about keeping those plugs, just drill a hole or two in the middle of them, stick something in there that'll hook onto the other side, and yank em out.
Maybe just a drop of penetrating oil around the rim in case they're kinda corroded on.
-Rob
Mike Rocket J. Squirrel Elliott wrote:
I'd try to get a knife blade around the rim to pry it out. The penetrating oil sounds like a good idea too.
Run a small sheetmetal screw through them and use a claw hammer or nail puller to pull them out.
Remove "YOURPANTIES" to reply MUADIB®
formatting link
Artificial Intelligence is no match for natural stupidity.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required