Hi does any body know of a modification to fit a oil cooler to a Fiat Fire
1108cc Tony.- posted
20 years ago
Hi does any body know of a modification to fit a oil cooler to a Fiat Fire
1108cc Tony.
I had very strange thoughts about a Fire engine with a 1.1 litre engine,and could only think about about those little VW campers from the
70's and 80's.Then I figured out what you meant an felt stupid.
I assumed Panda? Then i assumed hard tuned Panda - with Turbo's and NOS, with 200bhp on standard suspension/brakes/wheels that now needs an oil cooler :D
Ditto
-- Chet
You could use a take-off plate that fits in between the oil filter and block, and run pipes to a standard oil cooler mounted somewhere near the coolant radiator. Demon Tweeks do a range of these.
I doubt if there are any off-the-shelf solutions because this engine is so unlikely to need oil cooling.
Fully Integrated Robotised Engine (seriously )
I can't believe you'd need an oil cooler for this?
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.