Codes readout on voyager

Nov 18, 2003 4 Replies
G

Hi list,



I've had great help from mr stern in telling how to work to get a code out of the car. I got codes 12 21 52 and of course 55. So i renewed the o2 sensor with succes. My problems are almost cured.



My question now is..



I can't get a readout anymore. Does it mean my problem is fixed, or is there something I do wrong. This morning before a drive I took the battery of and got a 12 and 55 code, so thats ok. But this evening after 2 halfhour drives, i could not get anything!



Is this something to be happy about?



FYI I got the codes from

formatting link
GREAT SITE for chrysler.!


Vote
Twitter Facebook LinkedIn
D

H'm. No, you should *always* get at least a 55 after turning the key on-off-on-off-on. If you wait too long between key flicks, sometimes it doesn't register.

The other possibility is that the "CHECK ENGINE" bulb has burnt out!

DS

Vote
Twitter Facebook LinkedIn
G

I'll do my best to see what the problem is...the light is ok btw. Other suggestions?? I'll take the battery off again I think, see what that does

Guido

Vote
Twitter Facebook LinkedIn
G

Well, i got the battery off, and i got readouts 12 and 55 again, so that's sound. As for the 12 and 52 codes..well i first have drive a bit so see if they have disapeared.

thx Guido

Vote
Twitter Facebook LinkedIn
C

I've seen those lights get intermittent from bad solder joints on the cluster circuit board.

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required