Hi all, I need to change the battery on a 98b Intrepid, I have removed the negative post connection, the air filter, but how do I take out the air filter housing, Hopefully someone will guid me before the sun goes down.
Thanks Mike
1st message, and haven't browsed the group messages yet. but I'll do in near future
The battery comes out the side access panel at the right fron wheel well.
1.. Turn the steering wheel all the way to the right. 2.. Verify that the ignition switch and all accessories are OFF. 3.. Disconnect and isolate the negative battery cable remote terminal from the remote battery post Negative Battery Cable Remote Terminal 4.. Remove air cleaner housing. Remove the fastener at the air cleaner to body, air intake snorkel and lift housing from its grommet 5.. Remove battery splash shield. 6.. Remove two short bolts to battery hold down. 7.. Slide battery rearward to disconnect the negative and positive battery terminals from battery. 8.. Slide battery toward rear of vehicle and lift out through wheel well opening. 9.. Remove battery from vehicle.Glenn Beasley Chrysler Tech
MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.