Where is the pcv valve on an 2001 Sebring V-6 2.7??
- posted
18 years ago
PCV location
Loading thread data ...
- Vote on answer
- posted
18 years ago
Look towards the rear of the driver's side valve cover - you will see a hose that goes from the valve cover to the top of the intake plenum. The PCV valve is screwed into the plenum - oriented horizontally and points to the driver's side - and that hose (from the valve cover) plugs into the PCV valve. There probably is a cylindrical metal bulge about
1-1/2" in diamter in the middle of the length of that PCV hose - that's a heat exchanger that was added in the '00-'01 time frame so yours probably has it. The heat exchanger would have two smaller (10 or 12mm dia.) hoses coming off of it (one teeing into one of the heater hoses at the back of the engine, the other going to the pressure bottle).Bill Putney (To reply by e-mail, replace the last letter of the alphabet in my address with the letter 'x')