Using duplicate key on Honda CRV

Dec 02, 2006 2 Replies

Just bought an used Honda CRV 2000. I was not aware of the antitheft system and made a duplicate key. When I tried to turn on the car didn=B4t work. DOing some research I found about the antitheft system. I can turn on the ignition if I put the original key close to the duplicate one. My BIG problem, I cannot pull out the duplicate key from the ignition.



Any ideas on what to do??



===================================

I'm guessing you're not in USA or Canada? This stuff is all in your owner's manual. . . . . You will have to just wiggle and wiggle that key until it comes out. You may have to turn the steering wheel a bit to release the key, or even stick another key into the SHIFT RELEASE slot and put the whole thing in NEUTRAL to make key extraction easier. For help with immobilizer systems, see all the TSB's at

formatting link
Look in each model of Honda, since there are similarities.

'Curly'

I?d take it to a dealer before you do any permanent costly damage

All keys are chipped and need to be done by a specialist

"lauvargas" wrote: >

Just bought an used Honda CRV 2000. I was not aware of the > antitheft > system and made a duplicate key. When I tried to turn on the > car > didn´t work. DOing some research I found about the antitheft > system. I > can turn on the ignition if I put the original key close to > the > duplicate one. My BIG problem, I cannot pull out the duplicate > key from > the ignition. > > Any ideas on what to do??

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required