Jeep and Willys (new and old)

  1. Home
  2. Jeep and Willys (new and old)
14215 Threads Posts
to

Worth reading in Jeep and Willys (new and old)

valve stem has lip/rim can't get seal on

83 CJ7 4.2L I'm on #1 cylinder and I have a valve that has a rim or lip at the top of the stem where I can get the seal...
3 comments posted 22yrs
posted by wuji
3 comments posted 22yrs posted by wuji

t-case drop-do i need it?

I have a '94 YJ and recently added/ replaced the suspension. the jeep is from MN originally, so I have a bit of under b...
3 comments posted 22yrs
posted by <mhahn
3 comments posted 22yrs posted by <mhahn

26 below zero

and my 2000 TJ fired right up (in a parking lot). It took both legs to push the clutch in, but after 40 miles, even that...
41 comments posted 22yrs
posted by msosborn
41 comments posted 22yrs posted by msosborn

steering question

All, Lately my '94 yj feels "loose" on the highway. It seems it wants to wander a bit when I'm driving straight (suppos...
2 comments posted 22yrs
posted by doug.schuler
2 comments posted 22yrs posted by doug.schuler

Opinions on Fram Toughguard oil filters?

Last oil change, I put on a Fram Toughguard filter. As I understand, it holds oil back in the filter? What I've noticed...
38 comments posted 22yrs
posted by <Skip>
38 comments posted 22yrs posted by <Skip>

Do I buy 00 or 01 FSM?

Hi All, It may seem like a trivial question, but I am a bit confused. I bought my TJ last year and all documentation fr...
10 comments posted 22yrs
posted by a t t w
10 comments posted 22yrs posted by a t t w

Help... no elec power to my TJ

I started my 97 TJ today and drove about four blocks when the dash bell rang and the CHECK GAUGES message appeared. The...
7 comments posted 22yrs
posted by RalphDL
7 comments posted 22yrs posted by RalphDL

Dual battery installations

Looking for thoughts on dual battery setups. I have been running a dual setup for over a year now. Just replaced my bat...
10 comments posted 22yrs
posted by jimg
10 comments posted 22yrs posted by jimg

AMC20 1 Peice Axle install

I am in the middle of a 1-Piece axle upgrade (after I spun the end of the 2 piece) on my AMC20, on a 83 CJ-7, but I hav...
19 comments posted 22yrs
posted by no
19 comments posted 22yrs posted by no

How do I Keep my brake lines cool ?

I own a 1979 CJ-5 with a 401 dropped in it. It still has the stock exhaust manifolds. I don't like aftermarket headers:...
11 comments posted 22yrs
posted by ccr3
11 comments posted 22yrs posted by ccr3

Aftermarket Ignition

Well, its time to replace plugs, wires, dist. cap and rotor in my '97 Wrangler 4.0. I read alot of posts saying that up...
3 comments posted 22yrs
posted by skyshark
3 comments posted 22yrs posted by skyshark

Alignment Specs

Good Morning Group, What specifications are used for front alignment with a 3" lift and 31 x 10.50 x 15s? Thanks Group!
7 comments posted 22yrs
posted by nwpars
7 comments posted 22yrs posted by nwpars

spray on bedlining inside a jeep

has anyone ever heard of putting a spray on bedliner in the interior of a jeep wrangler? What would be the advantages/di...
13 comments posted 22yrs
posted by johnwtaylor
13 comments posted 22yrs posted by johnwtaylor