101 diff lock switch wiring

I disconnected it ages ago and cant remember where the wires connected to it - and its also really hard to get to now and tricky to see.

I have run a wire to it in my loom but cant see where to plug it in!

Should it have 2 connectors on or one?

There appears to be one on its lowest point - but i cant seem to push a normal sized spade connector onto it. is there infact a connector or

2 hidden round the back of it?
Reply to
Tom Woods
Loading thread data ...

Tom Woods uttered summat worrerz funny about:

The switch is exactly the same part as the picture of the reversing lamp switch I sent you a few weeks back. If I recall correctly there are two male spades on the switch.

Been for my last trip around the 'hood scaring the neighbours tonight :-(

Morph was in fine fettle.....

Lee D

Reply to
Lee_D

am i getting confused then? - where is the diff lock switch?

I was assuming it was part of the actual button infront of my radiator but it sounds like i might be barking up the wrong tree! ;)

I was wondering how it worked as it does if it was part of the button

you can always come round here and do some work on mine if you ever get desperate! :)

Reply to
Tom Woods

Tom Woods uttered summat worrerz funny about:

Underneath on the "Darkside" ;-)

right next to the Diff lock actuator on the front of the transferbox :-)

It may come to that!

I've got to come and pick up that Ghost book too come to think of it.

Lee D

Reply to
Lee_D

bugger. Thats another wire i have to run through the loom i just cable tied up then!.

It is waiting for you now.

perhaps i should drive round yours in the 2A when i next go to the tip in it (with the ghost stuff) and see if you can work out where my 'orrible rattle is coming from with any more accuracy than me ;)

Reply to
Tom Woods

MotorsForum website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.