series bits wanted,

Aug 23, 2004 12 Replies

hiya,



im after a good condition series passenger wing and door,



im in the sheffield area, but i would travell, ( not so sure about my landrover tho`)


andy


well go on then, series 3 or 2 or 2a wing, but preffer a 2a,

and both for the passenger side.

i did type all this in my original post but a pop up must have popped up and cocked me up,

andy

sorry about that.

It would help if you told us

A) wether you want Series II/IIa or Series III wing, as they are completely different. B) Which side, as they tend to be handed for the left hand and right hand side also.

Alex

It would look a bit silly if you had one series 3 wing and one series

2/2A with no headlight in!

ahh but series 2a (later models) have lights in the wings, exactly the same wings as on s3 except the passenger side has no hole for the fan.

so its not realy a problem having a S2 or S3 wing.

and if i exceptionaly good condition 2 turned up, then id mate it with my exceptionaly good series 2 wing in the garage, and id have a pair.

but as its got 1 good S3 drivers wing ready to put on, id like another S3 or 2a with headlight in wing.

Andy

Right .. now thats the wings sorted... the doors are different too... some II's have the check strap as a tube under the dash with a damper wastened to the door.... some have nowt... SIII's have a nylon block mounted in a slider on the door. Not so much a problem if you have a spare one of each of the opposites but still worthy of clarifiaction incase any one else goes and buys the wrong one then regrets it later.

:-)

Lee D

-- ________________________________

formatting link
Just a little hobby site about Landies :-) ________________________________

You talking about my 2A here?

:)

That hole's nothing that the piece of alloy plate doesn't fix....

formatting link

Yip. If someone's going to be fussy, they could use lumiweld/technoweld and a piece of the old bashed wing to fill the holes in the side of a S3 wing

Regards,

William MacLeod

You can always fabricate the mount for a II/IIa onto a later door. Besides, I don't believe that new doors are available for SII/IIa with the older restrainer on them, the only new doors I have seen are all SIII

Alex

Perhaps he could sellotape it to the top of the wing?

Alex

Could do with the same myself, passenger wing and driver door, series 3

Good second hand doors are hard to come by.

True. Maybe 'silly' was the wrong word.

just making a mental note to myself

" must avoid them trees"

Andy

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required