My primera remote has stopped working - the spare works ok. Can anyone advise where / how to get it reprogrammed? Would it be the batteries got too weak and lost the settings?
- posted
16 years ago
Reprogram Primera remote
Loading thread data ...
- Vote on answer
- posted
16 years ago
System operation System LED located in instrument panel near speedometer. Pressing key unlock button once deactivates system and unlocks driver's door only. Pressing key unlock button once within 5 seconds of unlocking driver's door unlocks all doors. Pressing key lock button activates double locking system and alarm. Programming When Key remote control added or replaced. System malfunction. How NOTE: A maximum of 4 key remote controls can be programmed. Obtain all key remote controls. Switch ignition ON and OFF 6 times within 10 seconds. NOTE: DO NOT remove key from ignition switch. After 2 seconds indicators will flash twice. Programming mode activated for 2 minutes, proceed as follows: Press and hold unlock button. Press lock button 3 times. Release unlock button. Indicators will flash once to confirm correct programming. Repeat above procedure to program remaining key remote controls. After fourth key is programmed, indicators flash 3 times to confirm correct programming. Switch ignition ON: Indicators flash twice (1-3 keys programmed). Indicators DO NOT flash (4 keys programmed). Programming mode deactivated. Check operation of all programmed key remote controls. Manufacturer: Nissan Model: Primera